Buck MOON - Additional Functions of Memory Keys 7 and 10: Initialisation; Additional Functions of Memory Keys 8 and 9: Resetting the Memory Positions; 5.3.4 Additional Functions of Memory Keys 7 and 8: Button Lock

8000302 | Instructions for use RUCK Podiatry Couch MOON | REV 04 |
Revision status 08/09/2023
40
Operation and use
5.3.2 Additional functions of memory keys 7 and 10: Initialisation
After maintenance tasks or replacement of components, the drives need to be
reinitialised.
Press memory keys 7 and 10 at the same time and hold the keys down. The
couch will be initialised. Several short beeps sound during initialisation. Release
the keys again when no sound is heard for at least 3 seconds.
Move all drives into their respective maximum and minimum positions using
the function keys.
After this, the podiatry couch is again ready for operation.
5.3.3 Additional functions of memory keys 8 and 9: Resetting the
memory positions
Press memory keys 8 and 9 at the same time and hold the buttons for at least
10seconds in order to reset all memory positions to the factory default settings.
5.3.4 Additional functions of memory keys 7 and 8: Button lock
Press memory keys 7 and 8 at the same time and hold the keys down until you
hear 2beeps. All LEDs light up: The button lock is now active.
Deactivate the key lock by pressing and holding both keys again until you hear
2beeps. The button lock is now deactivated again.