Buck MOON - Hand Switch Memory Functions

8000302 | Instructions for use RUCK Podiatry Couch MOON | REV 04 |
Revision status 08/09/2023
39
Operation and use
Memory keys
You can use the memory keys to move to stored positions. These positions can
be individually programmed for each of the 3 selectable operators. You can
select the operator using the save key (11).
Press a memory key and hold the key down to bring the podiatry couch to a
stored position. The drives will only run as long as the key is held down.
7 8 9 10
Saving memory positions with the save key
1. Move the drives to any position using function keys 1
to 6.
2. Press the save key to select an operator. The
selection is visually indicated by the corresponding
LED lighting up.
3. Hold the save key down for 3seconds, until the
selected LED of the selected operator ashes. You
now have 10seconds to save one of the 4memory
positions.
4. Press the desired memory key and hold the button
down for 3seconds. When the signal tone sounds,
the memory position has been stored.
5. The LED of the selected operator remains constantly
lit again.
11