8. Camera Settings
Stamps on pictures
Time, Date, Moon Phase, and Temperature may be added to pictures by checking the appropriate
box. Custom text may be entered in the Text 1 and Text 2 fields. This text may be added to
pictures by checking the box next to each field.
Image format
Click on the arrow to select the image format. Select the picture resolution – or video.
Delay between motion triggers
Click on the arrow to select the delay between motion triggers. If a camera receives a motion
trigger, it will not respond to another trigger until the delay time has elapsed.
Motion sensor
Click on the arrow to select the motion sensor sensitivity. To disable the motion sensor, set the
sensitivity to Off.
Pictures per motion trigger
Click the arrow to select the pictures per motion trigger value. When the value is set to 1, the
camera will take 1 picture each time it is triggered. To take multiple pictures with each trigger, set
the value greater than 1. For example, if the value is set to 3, the camera will take 3 pictures, as
fast as possible, each time it is triggered.
Blink LED when motion detected
Click the Yes/No toggle button to enable or disable a blinking LED when the camera detects
motion. This is a visible red LED on the front of the camera. It is very useful for doing a “walk test”
in front of the camera to verify that it is triggering correctly. (Note: If camera concealment is
important, this option should be set to No after the camera is installed in the permanent location.)
Camera schedule
Click the On/Off toggle button to turn the camera schedule on or off. Using the camera schedule,
the camera may be disabled at certain times of the day, or use different settings a different times of
the day.
Transmit last picture first
Click the On/Off toggle button to turn on “transmit last picture first”. This setting controls how the
camera transmits pictures when there is more than one picture waiting to be transmitted. If this
button is set to Off, the pictures will be transmitted in the order they were taken. If it is set to On,
they are transmitted latest picture first.
Automatically delete files
Click the arrow to change this setting. This can be used to have X-Series Network Manager
automatically delete pictures from your computer after a certain period of time. If it is set to Never,
X-Series Network Manager will never delete pictures from your computer.
Stamps on pictures
Click the Add Time Lapse button to setup a time lapse schedule.
X80 Wireless Camera User's Manual v2.0 18 of 35
To Next Page
Loading...