BuckMaster 36 - DETERMINING FRESH-AIR FLOW FOR HEATER LOCATION; Calculating Space Volume and BTU Support; Calculating Total Appliance BTU Load; Comparing BTU Load to Space Capacity

Page 8
MANTEL PROFILES FOR 36 (ZC) ZERO CLEARANCE CABINET
MUST BE FOLLOWED
Figure 5
50-3/8"
2-3/8"
2-3/8"
FRONT VIEW OF MODEL 42-ZC-FP
FLAT MANTEL WITH SUPPORTS
3"
2"
42"
COMBUSTIBLE
MATERIAL
STAND OFF
42-ZC-FP
LOUVERS
HOOD
CEILING
MANTELS WITH 3/4" BASE
2"
COMBUSTIBLE
MATERIAL
STAND OFF
42-ZC-FP
LOUVERS
HOOD
12"
3"
SUPPORT
10"
2"
COMBUSTIBLE
MATERIAL
STAND OFF
42-ZC-FP
LOUVERS
HOOD
Bottom of 3/4" Base or Support
may be Flush with top of Unit
if mantel is 10" wide or less.
12"
2-1/2"
3/4"
3"
3-1/2"
Bottom of 3/4" Base or Support
must be at least 2-1/2" from top
of Unit if mantel is 10" wide or more.
3/4"
3-1/2"
3"
2"
COMBUSTIBLE
MATERIAL
STAND OFF
42-ZC-FP
LOUVERS
HOOD
12"
3"
SUPPORT
2-1/2"
2-1/2"
2-1/2"
6"
MANTELS WITH 2-1/2" BASE
Bottom of 2-1/2" Base or Support
may be Flush with top of Unit
if mantel is 12" wide or less.
Bottom of 2-1/2" Base or
Support must be at least
2-1/2" from top of Unit if
mantel is 12" wide or more.
4”
NAILING FLANGE
4”
MODEL FP-36-ZC MANTEL 3/4” FLAT SURFACE
MODEL FP-36-ZC MANTEL WITH SUPPORTS
FRONT VIEW MODEL FP-36-ZC
FLAT MANTEL WITH SUPPORTS
39 1/2”
4”
4”