To Next PageTo Next Page
Need help?Do you have a question about the BuckMaster 36 and is the answer not in the manual?
Details specific locations and conditions where the heater must never be installed.
Specifies correct gas type usage and compliance with industry standards.
Provides essential safety warnings and general guidelines for operating the appliance.
Outlines immediate steps to take if a gas leak is detected to ensure safety.
Covers safe operation, maintenance, and handling of the heater and its components.
Addresses safe operation, preventing soot, and avoiding hazardous materials near the appliance.
Covers safe installation clearances, and general user precautions for safe operation.
Guidance on selecting an optimal and safe location for fireplace installation.
Information on gas line installation requirements and avoiding areas with high drafts.
Specifies minimum required distances from fireplace opening to walls, ceiling, and mantels.
Details floor clearance requirements and rules for combustible materials around the fireplace.
Steps for framing, installing, leveling, and securing the firebox into the opening.
Defines 'unusually tight construction' based on air exchange rates and building sealing.
Details the necessity of adequate air for combustion and ventilation, especially in tight constructions.
Worksheet to calculate room volume and its capacity to support appliance BTU input.
Instructions to sum the BTU/Hr of all fuel-burning appliances in the space.
Compares appliance BTU load to space capacity to determine ventilation needs.
Provides methods for supplying combustion air from adjoining rooms or spaces.
Details how to provide combustion air directly from outdoors using grills or ducts.
Ensures correct gas type connection and highlights safety warnings for installation.
Specific warning regarding the dangers of connecting directly to an unregulated LP gas tank.
Details where and how to check gas inlet and manifold pressures for proper operation.
Instructions on how to remove air from the gas lines during initial installation.
Visual guide and critical warnings for correctly positioning the CR3329 ceramic log set.
Detailed steps and warnings for properly installing the E.S.B. log set on the heater.
Guidance on applying the glowing embers material to the burner pan.
Essential safety checks and procedures to follow before attempting to light the pilot or burner.
Step-by-step guide for safely lighting the pilot light on the ITT millivolt valve system.
Instructions for igniting the main burner after the pilot light is successfully lit.
Explains how the thermostat adjusts gas flow to regulate room temperature.
Procedure for manually lighting the pilot using a match when the piezo igniter fails.
Essential safety checks and procedures for SIT modulating or manual valves before lighting.
Step-by-step guide for safely lighting the pilot light on the SIT modulating or manual valve.
Explains how the thermostat senses room temperature and adjusts burner output.
Procedure for manually lighting the pilot light using a match and lighter rod.
Essential safety checks and procedures for SIT millivolt valves before lighting.
Step-by-step guide for safely lighting the pilot on the SIT millivolt valve system.
Procedure for manually lighting the pilot light using a match and lighter rod.
Details the expected appearance, color, and height of flames for proper operation.
Step-by-step guide for removing, replacing, and installing the room air blower motor.
Crucial safety guidelines for operating the heater and handling its ceramic fiber components.
Safety instructions and warnings related to cleaning the heater and its logs.
Troubleshooting guide for problems related to igniter spark and pilot ignition.
Addresses common problems where the pilot light goes out after ignition.
Troubleshooting for issues like burner not lighting, delayed ignition, or backfiring.
Addresses issues causing odors, whistling noise, or clinking/ticking sounds.
Provides warnings about gas leaks and troubleshooting for detected gas odors.
Detailed list of part numbers for replacement components of the ITT valve system.
List of replacement part numbers for SIT modulating and manual valve systems.
List of replacement part numbers for the SIT millivolt valve system.
List of replacement parts for the SIT Millivolt Valve ESB Base.
Details the terms and conditions of the two-year limited warranty for the product.
Outlines what the warranty does not cover and legal limitations on liability.
General| Brand | BuckMaster |
|---|---|
| Model | 36 |
| Category | Indoor Fireplace |
| Language | English |
