Buderus Logamatic SC40 Installation And Servicing Instructions

Logamatic SC40 - Technical specifications are subject to change without prior notice.
67
Service level menu (for qualified heating engineers only)
7
7.6 System operating mode
Menu: Service > Operating mode
When the solar controller is first installed, the operating mode Always off is active in order to pre-
vent unintentional starting of the pumps.
For normal operation, the operating mode must be set to Auto.
V To switch to the Service level menu: simultaneously press the and buttons.
V Use the rotary selector to select Operating mode then press to confirm.
V Press and hold the button and use the rotary selector to change the setting.
V To save the new setting: release the button.
V To exit Operating mode, press the button.
Setting range Default setting New setting
Always off, Auto Always off
Tab. 38
OK
OK
SERVICE
Language
Time
System selection
Settings
Operating mode
>
OK
OK

Buderus Logamatic SC40 Specifications

General

Brand	Buderus
Model	Logamatic SC40
Category	Network Router
Language	English