Buehler ISOMET 2000 - Page 31

ISOMET™ 2000 Precision Saw Parts List
PART
NUMBER DESCRIPTION QTY U/M
29
2480S043 MOTOR, D.C. 1 RPM 40 IN.LB. T 1.00 EA
2480S044 MOTOR, D.C. 120 RPM 1 IN.LB. T 1.00 EA
2480S045 HOOD, ISOMET 2000 1.00 EA
2480S046 BRACKET, DRESSING CHUCK 1.00 EA
2480S047 COUPLING, TANK BULK-HEAD 3.00 EA
2480S050 LABEL, DRESS CHUCK-ISOMET 2000 1.00 EA
2480S051 PUMP ASSEMBLY 1.00 EA
2480S053 PUMP, COOLANT 12 VDC 1.00 EA
2480S054 PUMP AND COOLANT ASSEMBLY 1.00 EA
2480S055 GUIDE, DRESSING CHUCK 2.00 EA
2480S057 CLAMP, DRESSING CHUCK 1.00 EA
2480S059 COVER, FRONT 1.00 EA
2480S060 COVER, MIDDLE 1.00 EA
2480S061 LABEL, PUMP-ISOMET 2000 1.00 EA
2480S062 LABEL, POWER-ISOMET 2000 1.00 EA
2480S065 GUARD, SLINGER 1.00 EA
2480S066 CONNECTOR, TANK-PUMP 1.00 EA
2480S070 TANK, REMOVABLE 1.00 EA
2480S072 SAW HOUSING ASSEMBLY 1.00 EA
2480S074 CONNECTOR, CABINET-PUMP 1.00 EA
2480S078 GEAR, MITER-MACHINED 1.00 EA
2480S081 CABINET, UPPER - ISOMET 2000 1.00 EA
2480S082 CABINET, LOWER - ISOMET 2000 1.00 EA
2480S083 SPECIMEN ARM ASSEMBLY 1.00 EA
2480S084 THUMB SCREW ASSEMBLY 1.00 EA
2480S085 MOTOR, DRESSING CHUCK 1.00 EA
2480S086 DRESSING CHUCK ASSEMBLY 1.00 EA
2480S087 PCB, HIGH VOLTAGE 1.00 EA
2480S096 THUMB SCREW ASSEMBLY 1.00 EA
2480S097 MIC-SWITCH ASSEMBLY 1.00 EA
2480S114 CLAMP, SINGLE SADDLE 0.00 EA
2480S115 CHUCK, SINGLE SADDLE 0.00 EA
2480S135 CONNECTOR, SPIGOT 1.00 EA
2480S138 CABLE, OPER CONTROL/CPU ANALOG 1.00 EA
2480S139 HARNESS, CPU ANALOG/MOTORS 1.00 EA
2480S141 CABLE, CPU ANALOG/HIGH VOLTAGE 1.00 EA
2480S142 CABLE, RS232/CPU ANALOG 1.00 EA
2480S147 HARNESS, CPU ANALOG/ENCODER 1.00 EA
2480S148 FAN ASSEMBLY 1.00 EA
2480S149 CONNECTOR, CABINET-DRESSER 1.00 EA
2480S150 CONNECTOR, TANK-DRESSER 1.00 EA
2480S153 SCREEN, SPECIMEN 1.00 EA
2480S154 GASKET, DRESSING CHUCK 3.00 EA
2480S155 GASKET, ARM SLINGER 1.00 EA
2480S156 GASKET, GUARD SLINGER 1.00 EA
2480S157 HOOD ASSEMBLY 1.00 EA
2480S158 SPACER, HINGE 3.00 EA
2480S164 WIRE, JUMPER-2" 20 GAUGE BLK 1.00 EA
2480S166 STOP,HOOD 3.00 EA
2480S172 STIFFENER, HOOD 1.00 EA
2480S175 HINGE, ISOMET 2000 3.00 EA
2480S176 BLOCK, DRESSING 1.00 EA
2480S179 KIT, ACCESS-WRENCH 1.00 EA
MA112480-20 03/06/00