Figure 1 ISOMET™ 2000 Precision Saw
Warranty
This unit is guaranteed against defective material and workmanship for
a period of two (2) years from date of receipt by customer. Warranty is
void if inspection shows evidence of abuse, misuse or unauthorized
repair. Warranty covers only replacement of defective materials.
If for any reason, this unit must be returned to our plant for warranty
service, please apply for prior authorization with shipping instructions,
and include the following information: Customer Purchase Order
Number, Buehler Invoice Number, Date, Serial Number, and reason for
return.
Unpacking
Carefully unpack and check contents. If any components are missing
or damaged, save the packing list and material and advise the carrier
and BUEHLER of the discrepancy.
Assembly
The ISOMET™ 2000 Precision Saw is shipped fully assembled. A
Dressing Stick, three Specimen Chucks, two Flanges, one Diamond
Wafering Blade, one bottle of ISOCUT
®
Plus Cutting Fluid Concentrate,
and an accessory wrench are included. (Accessories available for use
with this unit.)
Installation
2
MA112480-20 03/06/00
To Next Page
Loading...
