NEXT
(2):
Press this button to search for the next
selection on the tape. Your tape must have at least
three seconds of silence between each selection for
NEXT to work. The sound will mute while seeking.
The SEEK up and down arrows will also find the
previous and next selections on the tape.
44
(3):
Press this button to reverse the tape rapidly.
Press
it
again to return
to
playing speed. The radio will
play while the tape reverses.
bb
(4):
Press this button to advance quickly to another
part of the tape. Press the button again to return to
playing speed. The radio will play while the tape
advances.
SIDE
(5):
Press this button to change
the
side of the
tape that
is
playing.
00
(6):
Press this button to reduce background noise.
The
double-D
symbol
will
appear on the display.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
AM-FM:
Press this button to play
the
radio when a
tape is
in
the player.
SOURCE:
Press this button to change to the tape
function when the radio is on. TAPE PLAY with an
arrow
will
appear on the display when the tape is active.
EJECT
Press this button to remove the tape. The radio
will
play. If you leave a cassette tape in the player while
listening
to
the radio,
it
may become warm.
CLN:
If this message appears on
the
display, the
cassette tape player needs to be cleaned. It will still
play tapes, but you should clean
it
as soon
as
possible
to prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player” in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio
will
display
---
to
show the indicator was reset.
3-21
To Next Page
Loading...
