To replace the battery:
1.
Insert a coin into the notch near the keyring. Turn the
coin counterclockwise
to
separate the two halves of
the transmitter.
2.
Once the transmitter is separated, use a pencil
to
remove the old battery.
Do
not use a metal object.
3.
Remove and replace the battery. Replace it as the
instructions inside the cover indicate.
4.
Snap the transmitter back together tightly to be sure
no
moisture can enter.
5.
Resynchronize the transmitter by pressing and
holding the
LOCK
and
UNLOCK
buttons for about
eight seconds. You must be
within
range
of
the
vehicle. When
the
transmitter has been
resynchronized, the horn will chirp and the exterior
lamps will flash once.
I
NOTICE:
When replacing the battery, use care not to touch
any of the circuitry. Static from your body
transferred to these surfaces may damage
the transmitter.
Trunk
Trunk
Lock
Release
To unlock the trunk from the outside, insert the door key
and turn
it.
Remote
Trunk
Release
-
-
The TRUNK release button
is
on the instrument panel
to the left
of
the steering
column. The transaxle
must be in PARK
(P)
or
NEUTRAL
(N).
If the
remote trunk release button
does not open
the
trunk,
make sure the remote trunk
release lockout switch
in the glove box is in
the on position.
2-13
To Next Page
Loading...
