Unlocking the Theft-Deterrent Feature After a
Power
Loss
Enter your secret code
as
follows; pause no more than
15
seconds between steps:
1.
LOC
appears when the ignition is on.
2.
Press MIN and
000
will appear on the display.
3.
Press MIN again to make the last two digits agree
with your code.
4.
Press HRS to make the first one or two digits agree
with your code.
5.
Press AM-FM after
you
have confirmed that the
code matches
the
secret code you have written down.
The display will show
SEC,
indicating the radio
is
now operable and secure.
If
you enter the wrong code eight times, INOP will
appear on the display. You will have to wait an hour
with the ignition on before you can try again. When
you try
again,
you will only have three more chances
(eight tries per chance) to enter the correct code before
INOP appears.
If
you lose or forget your code, contact your dealer.
Disabling the Theft-Deterrent Feature
Enter your secret code
as
follows; pause no more than
15
seconds between steps:
1.
Turn
the ignition to ACCESSORY or
RUN.
2.
Turn
the radio off.
3.
Press the
1
and
4
buttons together. Hold them down
4.
Press MIN and
000
will appear on the display.
5.
Press MIN again
to
make the last two digits agree
6. Press HRS to make the first one or two digits agree
until
SEC
shows on the display.
with your code.
with
your code.
7.
Press
AM-FM
after you have confirmed that the
code matches the secret code you have written down.
The display
will
show
---,
indicating that the radio
is
no longer secured.
If
the code entered is incorrect,
SEC
will appear on the
display. The radio will remain secured
until
the correct
code is entered.
When battery power is removed and later applied to
a
secured radio, the radio won’t turn on and
LOC
will
appear on the display.
To
unlock
a
secured radio see “Unlocking the
Theft-Deterrent Feature After
a
Power
Loss”
earlier
in
this section.
3-32
To Next Page
Loading...
