Buick LESABRE 1997 - Removing the Flat Tire and Installing the Spare Tire

Removing the Flat Tire and Installing the
Spare Tire
1. Use the wheel wrench to loosen the wheel nuts, but
don’t remove them.
2. Attach the wheel wrench to the bolt on the end of the
jack and rotate the wrench clockwise to raise the jack
head
a few inches.
3. Put the jack into a notch in the frame which is
located near each wheel well. The front notch is
10 inches (25 cm) back from the front wheel well.
The rear notch is 8 inches (25 cm) forward from the
rear wheel well.
5-28