If you want to insert a tape when the ignition or radio
is off, first press EJECT or RECALL.
Your tape bias is set automatically.
If
E
and a number appear on the radio display, the tape
won’t play because
of
an error.
ElO:
The tape is tight and the player can’t
turn
the tape hubs. Remove the tape. Hold the tape with
the open end down and try to turn the right hub
counterclockwise with a pencil. Turn the tape over
and repeat.
If
the hubs do not
turn
easily, your tape
may be damaged and should not be used
in
the
player. Try a new tape to make sure your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If
any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer.
If
your radio
displays an error number, write it down and provide
it
to your dealer when reporting the problem.
PREV (1):
Press this button to search for the previous
selection
on
the tape. Your tape must have at least three
seconds
of
silence between each selection for PREV to
work. The sound will mute while seeking.
NEXT
(2):
Press this button to search for the next
selection on the tape. Your tape must have at least
three seconds of silence between each selection for
NEXT to work. The sound will mute while seeking.
The SEEK down and up arrows will also find the
previous and next selections on the tape.
44
(3):
Press
this
button
to
reverse the tape rapidly.
Press
it
again to return to playing speed. The radio
will play while the tape reverses.
bb
(4):
Press this button to advance quickly
to
another part of the tape. Press the button again to
return to playing speed. The radio will play while the
tape advances.
SIDE
(5):
Press this button to change the side
of
the
tape that
is
playing.
RAND
(6):
Press this button to reduce background
noise when playing a cassette tape. The double-D
symbol
will
appear in the display.
SOURCE:
Press this button to change to the tape or
disc function when the radio is on. If both a tape and a
disc are installed, the system will first
go
to tape play;
TAPE
SIDE
and an arrow will appear on the display.
If
SOURCE
is
pressed again, the system will go to disc
play;
CD
PLAY will appear on the display.
3-28
To Next Page
Loading...
