6.
Start the engine and
let
it
run until you can feel the
upper radiator hose getting hot. Watch out for the
engine fans.
7.
By this time,
the
coolant level inside the radiator
filler neck may be lower.
If
the level
is
lower, add
more of the proper
DEX-COOL@
coolant mixture
through
the
filler neck
until
the level reaches the
base of the filler neck.
8.
Then
replace the pressure cap. At any time during
this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.
5-21
To Next Page
Loading...
