3.
Remove the air intake hose that is snapped over the
throttle body by pulling the hose upward and away
from
the throttle body which is located near the top
of the engine.
After
detaching the hose from the
throttle body, pull back the entire rear portion of the
air
cleaner by pulling upward and rearward.
4.
Replace the air filter.
5.
Reinstall the rear section of the air cleaner.
6.
Reattach the air intake
hose
by snapping it back onto
the throttle body.
Refer to the Maintenance Schedule to determine when to
replace the air filter.
See "Scheduled Maintenance Services"
in
the Index.
6-15
To Next Page
Loading...
