If the belt stops before it reaches the buckle, tilt the
latch plate and keep pulling until you can buckle it.
Pull up on the latch plate to make sure
it
is secure.
If
the belt is not long enough, see “Safety Belt
Extender” at the end
of
this section. Make sure the
release button
on
the buckle is positioned
so
you
would
be able
to
unbuckle
the
safety belt quickly if
you
ever had to.
3.
To
make the lap part tight, pull down on the buckle
end
of
the belt
as
you pull up
on
the shoulder part.
To Next Page
Loading...
