To Next PageTo Next Page
Need help?Do you have a question about the Burkert 8030 and is the answer not in the manual?
General| Power Supply | 12-36 V DC |
|---|---|
| Protection Class | IP65 |
| Output Signal | 4...20 mA, pulse, frequency |
| Process Connection | Thread, flange |
| Ambient Temperature | -10...+60 °C |
| Material | Stainless steel, PVDF |
Explains warning symbols like DANGER, WARNING, ATTENTION, and NOTE for hazard communication.
Highlights risks from high pressure, electrical voltage, high fluid temperatures, and the nature of the fluid.
Addresses preventing unintentional power activation and ensuring work by qualified personnel.
Covers safe restarting, compliance with instructions, avoiding explosive atmospheres, and device modifications.
Emphasizes checking chemical compatibility of device materials with fluids to prevent damage.
Warns about sensitive electronic components and necessary precautions against ESD.
Provides manufacturer contact address, warranty conditions, and internet resource for manuals.
States the flowmeter's purpose: measuring flow rate in neutral or slightly aggressive liquids without solid particles.
Details the device construction, SE30 module, S030 fitting, and the paddle-wheel measuring principle.
Explains the information presented on the device's name plate.
Lists available SE30 electronic modules and their connection requirements.
Specifies ambient temperature range (-15 to +60 °C), air humidity, and protection rating (IP65).
Lists EMC standards (EN 61000-6-2, EN 61000-6-3) and pressure directive compliance for the S030 fitting.
Details pipe diameter ranges (DN6-DN65), pressure class, and fluid temperature limits for fittings.
Covers flow rate measuring range (0.3-10 m/s), accuracy, linearity, and repeatability.
Presents tables and figures for device dimensions based on DN and module dimensions.
Lists device materials (e.g., PC, PA) and key electrical data including supply voltage (12-36 VDC) and current consumption.
Details electrical protection features and specifications for the female connector and cable type.
Warns about risks from high pressure, fluid temperatures, and hazardous fluid types during installation.
Addresses risks from electrical voltage, improper installation, and uncontrolled restarts.
Covers risks related to fluid pressure/temperature dependency and non-conforming commissioning.
Advises on environmental protection and guides on fitting selection and installation onto the pipe.
Provides an example for choosing pipe diameter and lists various fitting connection types.
Details assembling the electronic module and fitting, and warns about electrical discharge risks during wiring.
Specifies cable requirements and provides step-by-step instructions for assembling the female connector.
Completes female connector assembly and shows pin assignments for the Hall version.
Illustrates NPN and PNP wiring for the Hall version using terminal block diagrams.
Shows pin assignments and NPN wiring for the Hall Low Power version.
Warns about risks from electrical voltage, high pressure, and fluid temperatures during maintenance.
Covers risks from fluid nature and improper maintenance procedures.
Provides notes on safe cleaning practices and compatible cleaning liquids.
Warns against using unsuitable parts and recommends original accessories.
Advises on shock-resistant packaging, protection from environmental factors, and temperature limits.
Guides on storing the device in a dry place away from dust, specifying the temperature range (-15 to +60 °C).
Advises on environmentally friendly disposal and compliance with national/local regulations.
