Burkert 8045 Quick Start

9
Technical data
Type 8045
6.2. Conformity to standards and
directives
The applied standards, which verify conformity with the EU Direc-
tives, can be found on the EU Type Examination Certificate and/or
the EU Declaration of Conformity (if applicable).
6.3. Conformity to the Pressure
Equipment Directive
→ Make sure the device materials are compatible with the fluid.
→ Make sure the pipe DN is adapted for the device.
The device conforms to Article 4, Paragraph 1 of the Pressure
Equipment Directive 2014/68/EU under the following conditions:
• Device used on a pipe (PS = maximum admissible pressure;
DN = nominal diameter of the pipe)
Type of fluid Conditions
Fluid group 1, Article 4, Paragraph 1.c.i DN≤25
Fluid group 2, Article 4, Paragraph 1.c.i
DN≤32
or PSxDN≤1000
Fluid group 1, Article 4, Paragraph 1.c.ii
DN≤25
or PSxDN≤2000
Fluid group 2, Article 4, Paragraph 1.c.ii
DN≤200
or PS≤10
or PSxDN≤5000
6.4. UL certification
The devices with variable key PU01 or PU02 are UL-certified devices
and comply also with the following standards:
• UL 61010-1
• CAN/CSA-C22.2 n°61010-1
Identification
on the device
Certification Variable key
UL recognized PU01
Measuring
Equipment
EXXXXXX
®
UL listed PU02
6.5. Mechanical data
Part
Material (8045 with
flow sensor in PVDF)
Material (8045
with flow sensor in
stainless steel)
Housing / seal PC / NBR Black PPA / NBR
Cover with lid /
seal
PC / silicone PSU / silicone
Front foil Polyester
M20x1,5 cable
glands / seal
PA / neoprene
English

Burkert 8045 Specifications

General

Brand	Burkert
Model	8045
Category	Transmitter
Language	English