EasyManua.ls Logo

Burkert 8791 - Authorized Use; Particular Safety Instructions

Burkert 8791
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Authorized use
BVS 16 ATEX E 118 X
3 AUTHORIZED USE
Non-authorized use of the device may be dangerous to
people, nearby equipment and the environment.
Thedeviceisdesignedtobemountedonpneumaticlifting
androtaryactuatorsforthecontrolandregulationofmedia.
Type 8791 to 8793 PX45 is approved according to device
groupIIcategory3G/Dforuseinexplosion-riskareasof
Zones2and22.Thecompleteidenticationislocatedonthe
type label (see chapter "5.4").
Thedeviceismountedonapneumaticliftingorrotaryactua-
tor. In doing so, the control valve must have at least explosion
protectionapprovaloftheposition/processcontroller.
During use observe the permitted data, the operating condi-
tionsandconditionsofusespeciedinthecontractdocu-
ments, the operating instructions and on the type label
-oftheposition/processcontrollerand
- the control valve.
Use the device only in conjunction with third-party devices
and components recommended and authorized by Bürkert.
Correct transportation, storage and installation as well as care-
fuloperationand maintenanceareessential for reliableand
fault-freeoperation.
Usethedeviceonlyforitsintendedpurpose.
4 PARTICULAR SAFETY
INSTRUCTIONS
DANGER!
Risk of explosion when removing the electric circular plug.
Secure cable connections, which use circular plugs, with
suitablelockingclips.Thiswillpreventthecircularplugfrom
working loose.
Forexample:EXCLIP,FA.PhoenixContact,
TypeSAC-M12-EXCLIP-M,art.no.1558988or
TypeSAC-M12-EXCLIP-F,art.no.1558991
or locking clips, FA. ESCHA
LockingclipM8x1,art.no.8040691
LockingclipM12x1,art.no.8040501.
Do not remove or connect electric circular plug until the power
supply has been disconnected.
Risk of explosion when opening the device.
Open device only when no explosive atmosphere is present.
Risk of explosion caused by electrostatic discharge.
Intheeventofasuddendischargefromelectrostatically
chargeddevicesorindividuals,thereisariskofexplosionin
the potentially explosive atmosphere.
Protectdevicefromlargecharge-generatingprocesses.
Groundhousingbeforestart-up.
Take suitable measures to ensure that no electrostatic dis-
charges can build up in the potentially explosive atmosphere.
Cleanthedevicesurfacebygentlywipingitwithadampor
anti-static cloth only.
english

Other manuals for Burkert 8791

Related product manuals