Burmester 159 - Connecting the Power Cable

31 46
159 MONO POWER AMPLIFIER159 MONO POWER AMPLIFIER
Connecting the Power Cable
$
Before connecting the loudspeakers, please also read the operation manuals for the
components you plan to connect.
WARNING: MISSING OR FAULTY PROTECTIVE EARTH CONTACT
A missing or incorrectly connected protective
earth contact poses a risk to life.
$
Before connecting the device, make sure that the protective earth contact in
your mains socket is in operation.
$
Contact a professional if you are in any doubt.
TO CONNECT THE POWER CABLE:
1. Make sure that the mains switch (10) is in the 0 position.
2. Connect the power cable to the power socket (9).
3. Check that the voltage provided by your mains matches the voltage specifications.
NOTE:
You can find information about the required mains
voltage under the power socket (9).
4. Insert the mains plug into the mains socket.
5. Switch the mains switch (10) to ON.