10
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your
area. These are listed with a ‘?’ prefix.
1. Press and release the ‘Menu’ button and use the ‘Prev’ and ‘Next’ buttons to scroll
to <Prune>. Press and release the ‘Select’ button.
2. ‘Prune? <No> Yes’ is displayed. Use the ‘Next’ button to move to ‘Yes’. Press and
release the ‘Select’ button to confirm and prune the station list. Stations with a
‘?’ prefix will now no longer be displayed. Press and release the ‘Menu’ button to
return to the station display.
Storing a DAB station preset
Your Radio can store up to 10 DAB radio stations in its preset memories for instant
access to your favourite stations.
1. Tune the Radio to the DAB radio station that you wish to preset.
2. Press and hold the ‘Preset’ button for approximately 2 seconds until ‘Preset Store’
<1:(Empty)> is displayed.
3. Use the ‘Prev’ or ‘Next’ buttons to move to the preset location that you would like
to store the radio station to (1-10).
4. Press and release the ‘Select’ button, the display will confirm ‘Preset X stored’,
where ‘X’ is the number of the preset (1-10).
Note: If there is already an existing DAB station stored under a preset, it will be over
written when you store the new station.
Tune to a DAB station preset
In DAB mode:
1. Briefly press the ‘Preset’ button. ‘Preset Recall <1:>’ is displayed together with the
name or frequency of the station stored there, or (Empty) if no previous station has
been stored.
2. Use the ‘Prev’ and ‘Next’ buttons to move to the Preset location and station that
you would like to listen to (1-10).
3. Press and release the ‘Select’ button. The radio will instantly tune to that station
and begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will
be displayed, then the radio will revert to the previously selected radio station.
To Next Page
Loading...
