Bush Classic - Stop the Alarm; Snooze; Turn off the Alarm; Sleep Timer

15
Stop the alarm
When the alarm sounds press and release the ‘Standby’ button. Alternatively, you can
press and release the ‘Snooze’ button to ‘Snooze’ (see Snooze function below).
Note: If you press the ‘Standby’ button to stop the alarm, the alarm symbol will remain
in the display and the alarm will sound again at the same time the next day unless it
was set for ‘Once’ only.
Snooze
When the alarm sounds press and release the ‘Snooze’ button to Snooze. The Snooze
time countdown will be displayed and the alarm will sound again in approximately 5
minutes.
Turn o the alarm
In Standby mode:
Briefly press and release the ‘Alarm’ button repeatedly to turn Alarm 1 and Alarm 2 ‘On’
or ‘O’. Press and release the ‘Select’ button. ‘Alarm Saved’ is displayed.
Alternatively, follow the steps for ‘Setting an Alarm’ and select ‘O’ in step 9.
Sleep timer
You can set your Radio to turn o automatically using the sleep timer. You can choose
from 15, 30, 45, 60 and 90 minutes or Sleep o.
With the Radio switched on and in DAB mode:
1. Press and release the ‘Sleep’ button on the top of the Radio. ‘Set sleep time, Sleep
o’ is displayed.
2. Repeatedly press and release the ‘Sleep’ button to cycle through the available
options of 15, 30, 45, 60 and 90 minutes or Sleep o.
3. When the sleep time that you would like is displayed. Press and release the ‘Select’
button. The sleep time minutes that you have selected will be displayed on the
top line of the display and will countdown until the radio switches o.
Cancel the Sleep timer
1. Press and release the ‘Sleep’ button on the top of the Radio until ‘Sleep o’ is
displayed.
2. Press and release the ‘Select’ button.