Bush Classic - Using your Retro DAB Radio; Switch on; Switch off; Change the mode

8
Switch on
Rotate the On/O wheel on the top of the radio to ‘On’. Press and release the ‘Standby’
button on the top of the radio. The display will fully switch on and your Radio will
return to the mode that it was last used in (DAB/FM). If you were listening to a radio
station when you turned the radio o, then this station will be automatically selected.
Note: Always make sure that the aerial is fully extended, to ensure the maximum signal
strength and the best possible sound quality
Switch o
Press and release the ‘Standby’ button on the top of the radio. The Radio will go into
Standby mode and the time and date will be displayed.
To completely switch o the Radio and the display, rotate the On/O wheel on the top
of the radio to ‘O’ and switch o the mains power at the wall socket.
Change the mode
Briefly press and release the ‘DAB/FM’ button to change between DAB and FM mode.
Please check the display, which will confirm the mode.
Adjusting the volume
Turn the rotary volume wheel on the top of the radio, anti-clockwise to decrease the
volume and clockwise to increase the volume. When you adjust the volume, please
check the display which will confirm the volume setting.
Using your Retro DAB Radio