Bush Classic - Menu system settings; Manually set the date and time

16
Your radio must be switched on and in DAB mode when you change the system
settings.
Manually set the date and time
The first time you listen to DAB radio, the time and date of your product will be
synchronised automatically to that broadcast by the DAB service in 24 hour mode;
which is in line with daylight saving, but if you do wish to set the time manually, please
follow the steps below.
In DAB mode:
1. Press and release the ‘Menu’ button.
2. Use the ‘Prev’ and ‘Next’ buttons to scroll to <System>. Press and release the
‘Select’ button.
3. <Time> is displayed. Press and release the ‘Select’ button.
4. <Set Time/Date> is displayed. Press and release the ‘Select’ button.
5. ‘Set Time’ is displayed and the hour digits will flash. Use the ‘Prev’ and ‘Next’
buttons to display the correct hour in 24 hour clock. Press and release the
‘Select’ button.
6. The minutes will flash. Use the ‘Prev’ and ‘Next’ buttons to display the correct
minutes. Press and release the ‘Select’ button.
7. ‘Set date’ is displayed and the ‘Day’ will flash. Use the ‘Prev’ and ‘Next’ buttons to
display the day. Press and release the ‘Select’ button.
8. The ‘Month’ will flash. Use the ‘Prev’ and ‘Next’ buttons to display the month. Press
and release the ‘Select’ button.
9. The ‘Year’ will flash. Use the ‘Prev’ and ‘Next’ buttons to display the year. Press and
release the ‘Select’ button. ‘Time Saved’ is displayed and then returns to ‘Set Time/
Date’.
10. You can now use the ‘Prev’ and ‘Next’ buttons to scroll through the other options
available. Press and release the ‘Select’ button and confirm as required.
You can change the settings for:
• 12/24 hour clock display
• date format, DD-MM-YYYY or MM-DD-YYYY
• to auto update the time from the DAB signal or no update.
Note: An ‘*’ will be displayed next to the current setting.
11. Press and release the ‘Menu’ button to return to the station display.
Menu system settings