18
4. The software version will be displayed and you may wish to make a note of it here:
.................................................
5. Press and release the ‘Menu’ button to return to the station display.
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your DAB station presets will be deleted.
1. Press and release the ‘Menu’ button.
2. Use the ‘Prev’ and ‘Next’ buttons to scroll to <System>. Press and release the
‘Select’ button.
3. Use the ‘Prev’ and ‘Next’ buttons to scroll to <Factory Reset>. Press and release the
‘Select’ button.
4. ‘Factory Reset? <No> Yes’ will be displayed. Use the ‘Prev’ and ‘Next’ buttons to
scroll to ‘<Yes>’. Press and release the ‘Select’ button to confirm.
5. ‘Restarting...’ is displayed. After a few seconds the display will change to ‘Welcome
to Digital Radio’ and will then go to standby mode.
6. Press and release the ‘Standby’ button on the top of your radio. Your radio will
switch on and begin an automatic scan for DAB radio stations.
A progress bar will show the progress of the scan and the number of stations
found during the scan will also be displayed.
When the scan is complete your radio will select the first available station and
begin to play. Stations are listed in numerical and then alphabetical order by
default.
To Next Page
Loading...
