EasyManua.ls Logo

BWT 2005 - User Manual

BWT 2005
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Page
1
Contents
2
Introduction, features and benefits
PART ONE
3
Overview of the water softening process
4-5
Installation and operating considerations
6
Installation layout
PART TWO
7-8
Installing your water softener
9
Water hardness test
Programming procedure
10-12
PART THREE
Troubleshooting guide
13-14
Specification table
15
Warranty
16
CONTENTS
1

Table of Contents

Questions and Answers

  • D
    Dawn FoleyJul 30, 2025
    What to do if the water level in brine cabinet reaches overflow in BWT 2005?
    • R
      Robert DelgadoJul 30, 2025
      If the water level in the brine cabinet of your BWT Water Dispenser reaches overflow, here's what you should check: * First, verify that the line pressure is within the water softener's specifications by connecting a pressure gauge to a water outlet and ensuring the pressure is between 1.7 - 5.0 bar. * If the pressure falls outside this range, fit a pressure reducing valve or booster pump as needed. * Also, inspect the drain line to ensure it is not kinked, blocked, or frozen. Finally, check that the power is on and the connections are secure.
  • E
    Elizabeth RiceAug 14, 2025
    How to fix water that still remains hard in BWT 2005?
    • C
      Carrie AdamsAug 14, 2025
      If the water remains hard even after using your BWT Water Dispenser, try these steps: 1. Fill the brine cabinet with salt. 2. Switch the power on and check the connections. 3. Close the by-pass valve and open the inlet and outlet valves. 4. Reset the hardness if required.

Summary

Introduction, Features, and Benefits

Introduction

General welcome and overview of the booklet's purpose, including familiarization with the softening process.

Features and Benefits

Highlights key advantages and technological aspects of the water softener, focusing on the AMECS control system.

Part One: Overview of the Water Softening Process

What is a Water Softener?

Explains the fundamental mechanism of water softening using ion exchange resin and brine regeneration.

Installation and Operating Considerations

Details crucial factors for setting up the softener, including positioning, water pressure, and regulations.

Installation Layout

Illustrates the physical arrangement and connections for the water softener, including key valve components.

Part Two: Installing Your Water Softener

Positioning the Water Softener

Guidance on selecting the optimal location for the unit, considering water pressure and access.

Inlet and Outlet Connections

Instructions for connecting the softener to plumbing systems using various methods.

Drain Connection

Details on setting up the drain hose for the softener, including air gap and maximum length.

Overflow Connections

Instructions for connecting the overflow pipe to prevent flooding, ensuring proper discharge.

Electrical Connections

Guidance on safely connecting the low-voltage power supply to the unit via a transformer.

Filling the Brine Cabinet and Salt Usage

Information on adding tablet salt and maintaining the correct salt level for effective regeneration.

Testing for Water Hardness

Steps to measure local water hardness using a test kit for accurate softener setup.

Switching On for the First Time

Procedure for initial power-up, valve positioning, and system checks before programming.

Programming Procedure

Step-by-step guide to configure the softener settings, including time of day and hardness.

Manual Regeneration

Instructions on how to manually trigger the softener's cleaning cycle when needed.

Part Three: Troubleshooting and Specifications

Troubleshooting Guide

A checklist to diagnose and resolve common operational issues like hard water or brine cabinet overflow.

Specification Table

Technical details and performance metrics for different models, including dimensions and flow rates.

Warranty

Conditions and Terms of the Warranty

Outlines the coverage, limitations, exclusions, and included services for the product warranty.

BWT 2005 Specifications

General IconGeneral
BrandBWT
Model2005
CategoryWater Dispenser
LanguageEnglish

Related product manuals