BWT 25-50-75 SE User Manual

ind.1 du 16/10/2012 1 EUROMAT 2 P0011049
Instruction de montage et d’utilisation F
Instruction for assembly and use GB
Euromat 2
25-50-75 SE
(volumétrique/volumetric/objętościowy)
Sous réserves de modifications
Subject to modifications
Zmiany techniczne zastrzeżone
bwt-group.com
Adoucisseur d'eau automatique
Automatic water softener
Automatyczny zmiękczacz wody

BWT 25-50-75 SE Specifications

General

Model	BWT 25-50-75 SE
Capacity	25, 50, or 75 liters per hour (depending on the model)
Power Supply	220-240V, 50Hz
Material	Stainless steel, food-grade plastic
Cooling System	Direct chill or ice bank
Heating System	Internal heater
Certification	CE, WRAS
Type	Point-of-use water dispenser

Summary

Installation Requirements

General Installation Conditions

Specifies essential conditions for electrical supply, operating pressure, water hammer protection, filters, and drain connections.

Assembly and Setup

Hydraulic Connection

Instructions for connecting the water inlet, outlet, brine intake, and regeneration water discharge using flexible hoses.

Electrical Connection

Programming the Softener

Initial Programming Steps

Details on using control keys to modify displayed values and enter the code '12120' for volumetric functioning.

Volumetric Version SE Programming

Guides users through setting day, time, regeneration hours, duration, and volume for the softener.

Completing Programming

Describes how to exit the programming mode and confirm settings on the display.

Operation and Adjustment

Commissioning the Softener

Steps for initial setup, including salt filling, flushing, and test regeneration to prepare for operation.

Adjusting Residual Hardness

Technical Specifications

Electrical and Pressure Data

Environmental Operating Limits

Performance Characteristics