K
Kim SuttonAug 11, 2025
What to do if the water level in the brine cabinet of my BWT Water Dispenser is overflowing?
- AAshlee JonesAug 11, 2025
If the water level in the brine cabinet of your BWT Water Dispenser is overflowing, first check if the line pressure is within the specification (1.7 - 5.0 bar for the UK / 1.0 - 8.0 bar for EU) by connecting a pressure gauge to a water outlet. If the pressure falls outside this range, fit a pressure reducing valve or booster pump. Also, ensure that there is no flow through the drain line by checking if it is kinked, blocked, or frozen. Finally, verify that the power is on and the connections are secure, especially after a power interruption.