Need help?Do you have a question about the BWT AQA smart C and is the answer not in the manual?
General| Model | AQA smart C |
|---|---|
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Water Temperature Options | Hot, Cold |
| Filtration System | Yes |
| Certification | CE |
| Application | Office |
| Smart Features | Mobile App Control |
| Power Supply | AC |
System installation and user information requirements.
Regeneration based on water usage and programmed capacity.
Regeneration triggered by capacity exhaustion or time.
Installation must follow regulations and be done by qualified personnel.
Requirements for installation location regarding environment and utilities.
Compliance with drinking water standards and limits for iron/manganese.
Pipe flushing, dosing systems, and material compatibility.
Diagram illustrating system connection and placement.
Ensuring proper connection to sewage system based on safety standards.
Connecting the system according to the provided diagram.
Referencing separate manuals and warranty implications.
Observing flow arrows and connecting hoses correctly.
Explanation of control unit buttons, display, and navigation.
Details on what the control unit display shows.
Overview of default settings for operation and hardness.
Verifying the correctness of the system installation.
Includes filling salt cavity, brine chamber, and initial power-up steps.
Checking and adjusting blended water hardness using a valve.
When to refill, approved salts, procedure, and contamination prevention.
Recommended regular maintenance by BWT services.
Inspections that the operator must regularly carry out.
To Next Page
