48
EN
SALt
5
4
6
Filling up the regenerating agent
Refill the regenerating agent when the sieve base
is visible, at the latest.
All conventional regenerating salts (salt tablets in
accordance with DIN EN 973 Type A, e.g. Clarosal
or Sanisal / Sanitabs) can be used.
Remove the cover (4).
Pour a sack of regenerating agent into the supply
cavity (5).
pressbutton. The SALt display is deleted.
Fill the unit in such a way that no impurities enter
the supply cavity (5) (clean the regenerating agent
packaging before use, if necessary).
If impurities get into the supply cavity or brine con-
tainer (3), this must be cleaned using drinking water.
Service notification
When the litre display begins to flash, it is time for
a service.
Please contact customer service.
Motor position error
Please contact customer service.
Error with power monitoring of the magnetic valves
Please contact customer service.
Storage error
Please contact customer service.
POS
TBD
Para
433 L
To Next Page
Loading...
