3
Product Features
EDC-2051 Instruction Manual
Table-top Chairman / Delegate Unit
● High stability: parallel and series connection are applicable. Even one of the units
is disconnected/out of order, others can still operate normally.
● Featured with a built-in 2.5” loudspeaker. When the attendee presses the speaking
button, the speaker would be auto-off to avoid sound feedback.
● Equipped with speaking button and back-lighted indicator to control/show the
speaking status.
● Microphone capsule is equipped with illuminating red ring to show speaking status.
● No limitation of chairman unit’s quantity; you can also randomly change the
position and sequence.
● Chairman unit is equipped with speaking priority button.
● Built-in Ø 3.5mm earphone and recording plugs (volume adjustable).
● Gooseneck microphone with shield and flexible tube, easy to be positioned and
bent without noise (standard length: 43/48/56/70cm).
● Prevents the interference of electromagnetic wave.
Conference Main Control Unit
● Quick installation & easy maintenance via CAT5E cables.
● Equipped 4-chain RJ45 ports: each port enables the max. of 15 units; the total is 50
units. Via BXB extension power supply, it enables the max. of 265-unit connection.
● 4x20 digits LCD screen: showing conferencing modes, the ID of the operating
microphones, microphone volume and other .
● Multiple operating modes: Normal/Chairman/Override.
● Equipped with RS-232 interface: connects with BXB HDS-720 IP Network AV
Controller, camera, and other environmental control equipment for system
integration.
● Equipped XLR plug for the connection with other recording and audio equipment.
● Microphone auto-off setting (30/45 seconds).
● Open-mic mode or the max. of 9 microphones activated at the same time.
● Microphone auto-scanning ensures the status of each microphone before meeting.
To Next Page
Loading...