28
figure14. Hold the POWER button
DANGER!
Risk of electric shock
As long as MINI ES is in power-on state, the load distributor will keep energized.
· Only after completing the installation and commissioning can user start up MINI
ES.
Power-off Function
Procedure: hold "POWER" button for 10s. When "POWER" indicator turn off, MINI ES
stop operating.
figure15. hold the POWER button
Local Control Function
The MINI ES can be set up as "remote" mode and "local control" mode through holding the
corresponding button. Local control is the default system mode and remote control is
designed for the authorized installer.
Procedure: hold "LOCAL" button for 10s. When “POWER” and "LOCAL" indicator keep
on, local control mode starts.
To Next Page
Loading...
