BYD SEAL - Page 122

of lane lines. Performance degrades
signi󽗉cantly in situations such as
backlighting, sunset, snow covered
roads, and severely damaged roads.
●
Do not use the ICC system on
winding roads with sharp turns,
icy and slippery bends, or under
weather conditions, such as dense fog,
heavy rain and heavy snow, liable to
hinder the sensing operation of front
mmWave radars or the multi-purpose
camera.
●
Situations where ICC cannot be used
include:
●
The sensor is blocked.
●
The vehicle is running under severe
weather conditions.
●
Active safety function is triggered.
●
Vehicle speed exceeds speci󽗉ed
range.
●
ACC cannot be activated in special
driving modes like tow/snow/mud/
sand/terrain (if equipped with these
modes).
WARNING
●
ICC serves as a driver assistance
function only, so the driver must
be fully responsible for driving
safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause ICC to fail.
●
Use ICC based on your needs,
tra󽗋c, and road conditions.
Predictive Collision
Warning (PCW) &
Automatic Emergency
Braking (AEB)
Predictive collision warning (PCW) system
and automatic emergency braking
(AEB) system detect vehicles and
pedestrians ahead by using a radar
and multifunctional video controller.
When a risk of collision is detected,
the system gives an audio and visual
alarms to alert the driver, and improve
the potential braking pressure for better
response timing. If detecting increased
risk of collision, the system automatically
applies braking pressure to assist in
collision avoidance or impact reduction.
Usage
●
To enable or disable PCW & AEB, go
to Infotainment system
→ ADAS →
Active Safety.
●
PCW gives alarms in forms of audio,
text, and intermittent braking.
●
When PCW is activated,
or
󽗊ashes, depending on the level of
emergency, and a prompt message is
displayed on the instrument cluster.
●
When AEB is triggered,
󽗊ashes
together with a prompt message on
the instrument cluster.
●
In the event of malfunction,
is
displayed on the cluster.
●
If AEB is disabled manually by pressing
buttons,
is displayed on the cluster.
PCW System Activation Conditions
●
The driver enables the function
through vehicle setting.
●
Vehicle speed is within: 16km/
h-150km/h range.
●
Vehicle is in D gear.
121
04
USING AND DRIVING