BYD SEAL - Adjusting Front Seats

REMINDER
●
When adjusting the seat, do not
place your hand under the seat
or near its operating parts, to
prevent being crushed.
Adjusting Front Seats
Electrical Front Seat Adjustment*
Electrical front seat adjustment includes
back-and-forth adjustment of seat, up-
and-down adjustment of seat cushion*,
angle adjustment of seat base* and
angle adjustment of seat backs. Choose
the following methods according to the
functions available in your vehicle.
①Seat position adjust switch
●
Move the seat position adjustment
switch back or forth to move the seat
backward or forward.
●
Move the front end of the switch up or
down to change the seat base angle.
●
Move the rear end of the switch up or
down to raise or lower the seat.
②Seat back angle adjustment switch
●
Toggle the upper end of the seat back
angle adjustment switch to adjust the
seat back angle.
REMINDER
●
Releasing the switch will stop
the seat in this position. Do not
place anything under the seat as
this may prevent the seat from
operating.
Lumbar Support Adjustment*
The seat back pro󽗉le can be adjusted to
󽗉t the curvature of the occupant's lumbar
spine.
●
Press the front or rear portion of the
switch to increase or decrease the
curvature.
●
Press the upper or lower portion of the
switch to extend the curvature up or
down.
Memory System*
Memory switch position
The memory system switch is located on
the trim of driver door, having a total of 2
memory positions.
Setting function
●
Memory setting conditions
●
The vehicle is powered on with no
vehicle speed.
●
Seats and side mirrors have been
adjusted to the required positions.
●
No actions are performed by the
seats and side mirrors.
65
03
CONTROLLER OPERATION