Driver's Door Switches
Electrical Window Switch
●
When the ignition switch is on OK,
all the window switches can lift the
window up and down. After the vehicle
is powered OFF, no power windows
can be regulated.
Driver Side Windows Control Switch
There are 2 gears of window control, like
the gure① and ②.
Manual Operation
●
Press the window regulator switch to
① mode position and keep it (for
vehicles without anti-pinch function,
directly press and hold the window
regulator switch) to lower the window;
releasing the switch can immediately
stop the window lowering; pull up
the window regulator switch to ①
mode position and keep it (for vehicles
without anti-pinch function, directly
pull up and hold the window regulator
switch) to raise the window; releasing
the switch can immediately stop the
window raising.
Auto Lifting
●
Press the window regulator switch to
② mode position and release it to
automatically lower the window; pull
up the window switch to ② mode
position and release it to automatically
raise the window.
Anti-pinch Function
●
If someone or an object is caught
by the window when it is rolling up,
the window stops and rolls down
automatically.
REMINDER
●
Do not intentionally test the
anti-pinch function by jamming
any part of your body into the
window.
●
The anti-pinch function may not
work if an object is jammed into
the window when it is almost
completely closed.
●
Windows with anti-pinch function
can control opening or closing
the window by “intelligent voice
assist”.
Automatic Window Rolling-up and Anti-
pinch Failure
●
If the window working indicator
ashes, the automatic window closes
and anti-pinch functions fail, follow
the steps given below to restore the
functions:
●
Pull up and hold the manual closing
gear of the regulator switch to
allow the window to lift to the top
position and keep the window stall
at the top position for 400 ms,
until the switch indicator changes
from ashing to staying on. This
75
03
CONTROLLER OPERATION
To Next Page
Loading...
