BYD SEAL - Steering Wheel Controls

Folding Rear Seats
Pull up the folding release clasp on the
seat back to fold the rear seat back.
CAUTION
●
Fold or recover the rear seat in
a normal speed to avoid quickly
falling down or pulling up the
back seat, which may damage the
seat belts or cause abnormality.
●
Ensure that the left and right
seat belts expose when folding
or recovering the rear seat to
avoid the seat belts being stuck
between the rear seat and the
󽗊anks.
Rear Seat Head Supports
Lifting Head Supports
Lift the head support to a proper position,
and release it after hearing a locking
sound.
Lowering Head Supports
Press and hold the head support
adjustment button, lower the head
support to a proper position, and release
the button after hearing a locking sound.
Removing The Head Support
Press and hold the head support
adjustment button, remove the head
support, and release the button.
Installing Head Supports
Insert the head support post into
the bushing with the grooves facing
forward. Press and hold the head support
adjustment button, lower the head
support to a proper position, and release
the button after hearing a locking sound.
REMINDER
●
To avoid neck injury and other
head injuries, adjust the height of
head support so that its center is
level with the top of your ear.
●
After adjusting the head support,
press the head support down to
con󽗉rm that it is locked.
●
Do not drive the vehicle without a
head support.
●
Do not attach any object to the
head support lever.
67
03
CONTROLLER OPERATION