BYD SEAL - Interior Light Switch

Status Description LED indicator Beeping
Ignition o󽗈 or E-Call system
failure
O󽗈 \
Power-on self-check mode Flashing fast - 2 Hz \
Ignition on and self-check
passed
Solid on if self-check is
passed
\
E-Call connecting Flashing - 1 Hz A beep
E-Call connected Flashing - 1 Hz A beep
E-Call ended Solid on Two beeps after E-Call ends
60-minute callback time
Flashing extremely slowly -
0.2 Hz
\
Interior Light Switch
Charging port con󽗉guration I: Front
Interior Lights Switches
Charging port con󽗉guration II: Front
Interior Lights Switches
When the vehicle is not powered OFF
and the "DOOR" gear switch is turned
on, if you touch the switch while the
door is open, the interior light will switch
between high and low lighting intensity,
and will not go out; when the vehicle
is powered OFF and the "DOOR" gear
switch is turned on, the interior light
will go out after the door is opened
for a period of time. If there are other
operations during this period, the timer
will be restarted. To turn on or o󽗈 the
“DOOR” gear, slide down the top status
bar on the infotainment screen to display
the shortcut page.
Ambient Lights*
To control the brightness, color and area
of the ambient light, go to infotainment
touchscreen
→ Vehicle Settings →
Ambient Light.
80