BYD SEAL - Instrument Cluster Indicators

CAUTION
●
During occasional communication
delays in the instrument cluster
system, the instrument cluster
may automatically switch to
simple mode for safe driving. In
this mode, the cluster continues
to display driving related
information normally without
a󽗈ecting normal vehicle travel.
After the system becomes normal,
the cluster may automatically exit
the simple mode. If it does not,
try the following actions to switch
back to normal mode:
1.
Press and hold the roller button
on auxiliary dashboard for
three seconds to restart the
instrument cluster information
display system.
2. While vehicle safety is ensured,
operate the vehicle power
CAUTION
switch to turn o󽗈 the vehicle
and then turn the ignition on.
●
If the instrument cluster
remains in simple mode after
those actions have been
taken, promptly contact a BYD
authorized dealer or service
provider for inspection.
●
The image of the instrument
cluster view is for reference only
and is subject to actual factory
con󽗉guration.
Instrument Cluster
Indicators
Indicators and Warning Lights
Turn signal indicator Position light indicator
High beam indicator HMA indicator*
OK indicator Discharge indicator
ICC indicator Hill descend control indicator*
AVH indicator Exterior light switch indicator
Economic mode indicator Sport mode indicator light
40