EasyManua.ls Logo

BYD SEAL - Discharging Device

BYD SEAL
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
voltage battery would be triggered and
charge the low-voltage battery through
high-voltage battery.
REMINDER
When the vehicle is stored for
a long time, the smart charging
function may be activated, which
is normal.
Power for smart charging comes
from the power battery pack, so
it is normal that an SOC decrease
is noticed when the vehicle is
powered on.
Discharging Device
This vehicle features a discharging
function: vehicle to load (VTOL)
function.
CAUTION
Do not touch any metal terminal
of discharging socket or vehicle
charge port during discharging.
Stop discharging immediately if
there are any abnormalities such
as peculiar smell and smoke.
See "Charging Instructions" for
charging safety warnings.
Store the product in a cool and
dry place when it is not in use.
When charging, do not place the
equipment in the trunk, under the
front of the vehicle, or near the
tires.
When using the equipment,
prevent it from getting rolled
over by the vehicle, dropped, or
trampled on.
CAUTION
Never drop the equipment or
move it by pulling it directly
by its cable. When moving the
equipment, handle it with care.
Never use the charging equipment
if the household power strip cable
becomes soft, if the charging
connector cable is worn out, if the
insulation layer is cracked, or in
case of any other damage.
Never use the equipment
when the charging connector,
power plug, or power strip is
disconnected, broken, or there is
any sign of surface damage.
CAUTION
For precautions concerning use of
the discharge connection device,
please refer to the precautions for
charging equipment included in
item 3 of "Charging Precautions".
Before discharging, please
con󽗉rm the vehicle state of charge
(SOC; battery charge level) and
estimate the remaining driving
range.
Before activating Vehicle to Load
(VTOL), make sure the external
load is o󽗈.
REMINDER
Try to use this function when the
SOC is high.
The VTOL function is restricted
when the vehicle SOC is low.
The static power consumption
of the vehicle will increase if,
when the vehicle is powered
o󽗈, the VTOL connection
93
04
USING AND DRIVING

Related product manuals