BYD SEAL - Switches; Light Switches

REMINDER
●
Never adjust the steering wheel
while driving, as this is under risk
of impaired vehicle control, which
can lead to accidents.
●
After adjusting the steering wheel,
move it up and down to verify that
it is securely locked.
Power-Assisted Steering Mode Settings
●
The feel of steering assistance varies
from person to person, and so do the
evaluation and needs for this feel.
●
To set the steering mode, go to
the Infotainment touchscreen
→
Vehicle Settings → Intelligent Chassis
→ Steering Assist setting and select
Comfort or Sport.
REMINDER
●
When the vehicle is running at
high speed, if you feel the steering
wheel is light, it is suggested to set
the power-assisted steering mode
to sport mode.
Switches
Light Switches
Turn the knob at the end of the light
switch to "
" to turn o󽗈 all lights
except for daytime running lights.
Auto lights
Turn the knob at the end of the light
switch to "
". The BCM captures the
brightness data from the light intensity
sensor to automatically turn the position
lights and low beam on or o󽗈.
REMINDER
●
The light intensity sensor is
located on the top of the
windshield. Do not block the
sensor or let anything splash on it.
Position lights
Turn the knob at the end of the light
switch to "
" to turn on position
lights.
71
03
CONTROLLER OPERATION