EasyManua.ls Logo

BYD SEAL - Page 156

BYD SEAL
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMINDER
Turn o󽗈 the A/C and ventilate
with natural air before parking
to keep the air inside the vehicle
relatively dry.
Inspect, clean, or replace the
󽗉lter regularly.
Try to keep the cabin clean and
fresh.
If the odor persists after odor
prevention methods are used, it
is recommended to contact a
BYD authorized dealer or service
provider for repair.
Function De󽗉nitions
Auto mode
Tap the auto button, its indicator lights
up on the front A/C panel, the auto
mode is activated.
If any manual control button is
pressed in automatic operation mode,
the corresponding status of the
button pressed will be set and other
statuses will continue to be adjusted
automatically.
A/C power button
Press this button or tap “ON” on
the A/C operating interface to turn o󽗈
the A/C. The air outlet mode keeps
unchanged, while the air input mode
turns to recirculation mode. Press this
button or tap “ON” again to turn on
the A/C.
With the A/C turned o󽗈, press this
button or tap “ON” to turn on the
A/C in the memorized modes, with the
set temperature, blower speed and air
outlet mode being those when the A/C
was turned o󽗈 last.
Air amount regulation
Tap the suitable blower speed level
button to set the blower speed at a
desired level. A higher blower speed level
indicates a higher air volume.
Defrost button for front windshield
Press this button on A/C control panel
or tap “Front” on the screen to
distribute air to the front windshield
and side windows. Press this button
again or tap “Front” on the screen;
the A/C will return to the status used
last time.
Press this button on A/C control panel
or tap “Front” on the screen to
activate the defrosting and demisting
function and no matter whether the
compressor control button is operated
or not, the A/C will also be turned on.
Temperature regulation
Driver A/C temperature adjustment
In the individual mode: Temperature
regulation on the driver’s seat.
In the relative mode: Temperature
regulation on the driver and front
passenger seat.
To increase/decrease the
temperature, tap the upper/lower
arrow on the screen, or touch the
temperature display area and then
swipe downwards/upwards.
Front passenger A/C temperature
adjustment
In the individual mode: For the
front passenger seat temperature
regulation.
In the relative mode: This mode is
for setting temperature for the front
passenger's space, and then quitting
the linkage mode and entering the
independent mode.
To increase/decrease the
temperature, tap the upper/lower
arrow on the screen, or touch the
155
05
IN-VEHICLE DEVICES

Related product manuals