BYD SEAL - Page 158

●
Tap the corresponding icon on the
Infotainment system to select the
corresponding blowing mode.
●
Air blowing modes can be combined
freely, and up to three air
blowing modes can be enabled
simultaneously as required.
●
Adjustments can be made according to
the following air supply.
Blowing face: Air is mainly distributed to
face level.
Blowing legs: Air is mainly distributed to
footwell.
Defrost: Air is mainly distributed to the
front windshield and side windows.
Intelligent A/C ON Method
Remote A/C ON with intelligent key
●
You can turn on the A/C through
the remote control key to gain a
comfortable interior environment in
advance.
Turning on A/C by voice
●
Control the A/C settings by the voice
button on the steering wheel or by
saying "Hi BYD".
Turning on A/C by cloud service
●
You can turn on the A/C through BYD
app interface to gain a comfortable
interior environment in advance.
Usage Guidelines
●
To quickly cool down the interior after
long exposure to sunlight, drive for a
few minutes with the windows open.
to exhaust hot air and speed up A/C
cooling.
●
Make sure that the air intake grille in
front of the windshield is not blocked
(for example, leafs or snow).
●
In humid weather, avoid blowing cool
air onto the windshield to The inner
and outer temperature di󽗈erence will
cause glass fogging.
●
Keep the space under the front seats
clear to improve air circulation.
●
In cold weather, set the air volume to
a high range for 1 minute to remove
snow or moisture from the intake
passage and reduce fogging.
●
Close all windows when driving behind
other vehicles on windy days or
dusty roads. If the dust raised by
other vehicles also enters the vehicle
even if all windows are closed, it is
recommended to set the air intake
mode as recirculation mode and set
the blower speed at any position other
than "0".
●
To speed up cooling, adjust the
temperature to “LO" and use the
internal circulation mode for a few
minutes.
●
In cold weather, use internal
circulation for a few minutes for quick
heating. To prevent fogging after cabin
is heated, select external circulation for
air intake.
●
In heating mode, press the compressor
control button to light up the button
(turning on the compressor), which
can reduce air󽗊ow moisture.
●
In the ventilation mode, the system
introduces the natural wind from
outside, which is suitable for spring
and autumn.
Vents
To access the A/C setting page, go to
Infotainment touchscreen
.
The vent area is the adjustment area of
A/C vents. Touch the sliding area to adjust
the air outlet direction.
157
05
IN-VEHICLE DEVICES