BYD SEAL - Storage Compartments

Air puri󽗉cation operation interface On the infotainment operation screen,
tap Air puri󽗉cation. The air puri󽗉cation
interface is displayed.
1 Air puri󽗉cation operation
2 PM2.5 detection button
3 Quick puri󽗉cation button
4 Anion button
PM2.5 detection button
Tap PM2.5 detection. When the button
lights up, the system detects PM2.5
concentration inside/outside in real time
and displays the real-time value on
the infotainment touchscreen. PM2.5
detection stops when the button turns
o󽗈.
Quick puri󽗉cation button
Tap this button to enable fast puri󽗉cation.
Tap it again to end fast puri󽗉cation.
Anion button
●
Function: sterilization, air puri󽗉cation,
refreshing.
●
Tap the "Anion" button on the A/C
or green air puri󽗉cation interface
to inactivate or activate the anion
function.
REMINDER
●
The PM2.5 value detected by the
on-board air puri󽗉cation (PM2.5)
detector is the PM2.5 value in
the air near the vehicle carrying
the device in a short time, which
should be di󽗈erent from the
daily or real-time PM2.5 value
declared by national and relevant
government authorities.
●
The frequency of PM2.5 detection
should be reduced in the
following environments:
●
Sandstorms and other such
extremely harsh environments.
●
Cold regions (with ambient
temperature below -20°C).
159
05
IN-VEHICLE DEVICES