EasyManua.ls Logo

BYD SEAL - Page 56

BYD SEAL
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When the vehicle is in car search
mode, press the lock button again.
The vehicle enters the next car search
mode.
Raising/Lowering Windows with Smart
Key*
When the ignition is switched o󽗈:
Press and hold the lock button on the
smart key to raise the four windows.
Press and hold the unlock button
on the smart key to lower the four
windows.
To enable or disable key unlock/
lock/closing window functions, go to
Infotainment touchscreen
→ Vehicle
settings → Window and Lock.
CAUTION
Before activating the remote
window closing, please con󽗉rm
that any body part of passengers
in the vehicle will not be stuck or
clamped by the window.
Locking/Unlocking with Microswitch
Locking
In anti-theft mode, press the front door
handle microswitch while carrying the
smart key to unlock all doors. The
hidden door handles automatically
retract. At this time, the side mirrors
fold in (when the switch is set to
AUTO), and the turn signal 󽗊ashes
once. If the hood or trunk is not closed,
the side mirrors will not fold, the turn
signals will not 󽗊ash, and the alarm
will sound once.
If any door is not closed properly, the
side mirrors will not fold, the turn
signals will not 󽗊ash, the four door
handles will not retract, and the alarm
will sound once.
If the hood or trunk is not closed,
the side mirrors will not fold, the turn
signals will not 󽗊ash, and the alarm
will sound once.
Unlocking
When doors are locked, hold the smart
key close to the activited area, press
the microswitch on the front door
handle, then all doors can be unlocked
at the same time. The hidden door
handles automatically extend and the
turn signal 󽗊ashes twice.
In anti-theft mode, after activating the
unlock function, open the doors within
30 seconds. Otherwise, all doors will
automatically be locked again and the
four door handles will retract*.
Pressing the microswitch will not
unlock/lock the doors when:
The microswitch is pressed while a
door is opened or closed.
The key is left in the vehicle.
REMINDER
If the electronic smart key is too
close to an exterior door handle or
55
03
CONTROLLER OPERATION

Related product manuals