BYD SEAL - Page 91

●
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment system.
2. Charging
●
Unlock the vehicle and open the
charge port door:
●
Open as per the instructions in
"Using Household Portable AC
Charging Equipment".
●
Connect the vehicle port:
●
Plug the equipment's charging
connector into the port and lock it.
●
Charging settings:
●
For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. For details, see the
user manual for charging pile/box.
●
The charging connection indicator
on the instrument cluster lights up.
●
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
●
At this point, you can schedule
charging on the Infotainment system.
See "Charging Reservation" for the
setup process.
3. Stopping charging
●
End the charging:
●
Charging ends automatically when
early stop time is due or the charging
is complete.
●
Press the unlock button on the
smart key or press the door handle
microswitch while carrying the smart
key and pull out the charging
connector.
●
Disconnect the charge port:
●
Disconnect as per the instructions
in "Using Household Portable AC
Charging Equipment".
●
Close the charge port cap and the port
door (see "Using Household Portable
AC Charging Equipment").
●
Store the equipment properly.
●
If using an AC charging pile/box,
place the charging connector in its
designated location in the charging
pile/box.
Using DC Chargers*
1. Equipment descriptions
●
Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a speci󽗉c charging
station.
●
Equipment speci󽗉cations: Please
check the instructions for the charger.
●
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
DC charging is achieved by connecting
the vehicle to a DC charging connector via
its connector.
●
Unlock the charge port door, then
open the port door and cap.
●
Connect the vehicle port:
●
Plug the connector into the port,
making sure it is tight.
●
Operate the charging equipment to
start charging.
90