Getting Started BYK-Gardner GmbH
18 / 43 spectro2guide
4.4 Charging the Instrument
The instrument provides two ways for charging.
4.4.1 Charge via docking station
ü The docking station is power supplied.
a) Put the instrument into the docking station.
ð The charge LED pulsates red as long as the bat-
tery charge is < 15%.
ð The charge LED pulsates yellow as long as the
battery charge is < 50%.
ð The charge LED pulsates green as long as the
battery charge is < 90%.
ð The charge LED lights up in green when the bat-
tery charge is ≥ 90%.
b) Keep the instrument in the docking station as long
as the instrument is not in use.
ð The instrument is fully charged and can be put in
operation.
4.4.2 Charge via USB cable
a) Connect the instrument with the USB cable to a
power supply.
ð The instrument loading bar on the display shows
the battery charge.
b) Disconnect the instrument from the USB cable when
it is fully charged.
ð The instrument is fully charged and can be put in
operation.
To Next Page
Loading...
