Measure BYK-Gardner GmbH
26 / 43 spectro2guide
5.2 Perform Difference Measurement
ü At least one standard is existing.
a) Click on icon “Difference“: .
ð A list with standards appears.
b) To continue existing Testserie select it from list or add
new.
c) To add a new Testserie click on "New Testseries".
ð The screen below is displayed.
d) Place instrument on sample.
e) Click on “Measure” or press operate button.
ð Sample is measured and automatically saved. Scroll down
to see data table and statistics.
To Next Page
Loading...
