BYK spectro2guide - 4.6 Define Measurement Parameters

BYK-Gardner GmbH Getting Started
spectro2guide 21 / 43
4.6 Define Measurement Parameters
a) Go to Configuration > Measurement Parame-
ters.
ð The screen below is displayed.
1
2
3
4
5
6
7
8
1 Color System:
Select color system.
Default is CIE L*a*b*.
5 Geometry:
Select SPIN/SPEX
mode. Default is SPIN.
Mode only available
for geometry d:8°
(Cat.No. 7070)
2 Color Equation:
Select color equation.
Default is ∆E*.
6 Illumination:
Select standard illumi-
nant. Default is D65.
3 Color Indices
Select color indices.
7 Observer:
Select standard ob-
server. Default is 10°.
4 Gloss
Turn Gloss on or off.
8 Fluorescence:
Turn fluorescence in-
dices on or off.