Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
22
【Virtual SSID】Click ‘Virtual SSID’ button to enter the virtual SSID config page；
【Band】The default is 2.4GHz（B+G+N）；
【SSID 】Set wireless SSID name. Nowadays, it doesn’t support to set as Chinese SSID
name.
【 Bandwidth 】 It is best to select 20MHz, because many PC don’t support 40MHz ；
Sometimes, PCs can’t connect to the WIFI if we select 40MHz or
20MHz/40MHz；
【 Channel 】 The default is Auto ； We can select a channel without glitches by manual
according to the surrounding environment；
【Advanced】Click ‘Advanced’ button and enter wirelees password config page；
2. After setting wireless configuration, click ‘Save/Apply’ button to finish setting.
8.2 WLAN Password Configuration
1．According to #8.1, click ‘Advanced’ button to enter ‘Wireless settings-Security’ page,
we can set ‘Network authentication mode’ , ‘encryption’ and WIFI password.
To Next Page
