To Next PageTo Next Page
Need help?Do you have a question about the C-Data EPON HGU and is the answer not in the manual?
Essential safety guidelines to follow before and during equipment installation.
Key safety warnings and best practices for operating the ONU device.
Overview of the capabilities and functionalities of the EPON HGU products.
Technical details including ambient temperature, humidity, and power requirements.
Identification and purpose of all physical ports, buttons, and LEDs on the device.
Explanation of the status indicators (LEDs) and their operational meanings.
Step-by-step guide for connecting fiber, Ethernet, and coaxial cables.
Diagrams illustrating common use cases and network topologies for the ONU.
Procedure for establishing a physical network link between the ONU and a computer.
Steps to access and log in to the ONU's web-based management interface.
How to check the ONU's registration status with the OLT for network access.
Monitoring optical input and output power levels for signal diagnostics.
Configuration steps for setting up LOID authentication for ONU registration.
Detailed guide for setting up internet connectivity using the route mode.
Steps to configure PPPoE for internet access when using route mode.
Steps to configure DHCP for internet access when using route mode.
Steps to configure Static IP for internet access when using route mode.
Guide to setting up internet connectivity using the bridge mode.
How to check the operational status of configured WAN connections.
Procedure for removing an existing WAN connection configuration.
Setting the IP address and subnet mask for the ONU's management interface.
Monitoring connected clients on the LAN and WLAN interfaces.
Initial configuration steps for enabling multicast and IPTV services.
Configuration of IGMP Snooping to optimize multicast traffic flow.
Enabling or disabling IGMP Proxy for multicast traffic management.
Setting up VLANs to segregate IGMP multicast traffic.
Configuring the basic wireless network settings like SSID and band.
Securing the wireless network by setting authentication and encryption.
Enabling and configuring multiple SSIDs for enhanced wireless management.
Setting the operational parameters for the CATV port on the ONU.
Checking the status and key parameters of the CATV service.
Setting up the WAN connection to serve as a channel for TR069 management.
Configuring the ONU as a TR069 client for remote management by ACS.
Enabling or disabling remote access (ping, web) to the ONU.
Resetting the ONU to its factory default settings and parameters.
Instructions for updating the device firmware to the latest version.
Procedure for performing a restart or reboot of the ONU device.
General